What Stands Out
SCX24 drive shafts have model-specific adjustable ranges.
1.0-inch and 1.3-inch beadlock wheels have distinct listed dimensions.
SCX30 V2 servo offers aluminum and brass variants.
Cuttable shaft and tire dimensions require a vehicle-clearance check.
What to Check
Confirm exact model/trim and variant.
Compare component dimensions and electrical ratings.
Verify included hardware and terms on the current product page.
Product Review
1. 【US Warehouse】MEUS Racing SCX24 Deadbolt Stainless Steel Center Drive Shaft for 1/24 SCX24 Deadbolt B17
Product overview
A product overview has not been provided.
Who It Fits
This center drive shaft listing is specifically labeled for the 1/24 Axial SCX24 Deadbolt B17. It is not a general-purpose shaft for every SCX24 body style.
Listed Details
- Stainless steel material; listed weight 16.2 g.
- Adjustable short shaft: 35.5–40 mm; adjustable long shaft: 63–85 mm.
- Listed drive-shaft screw size: M1.4.
- Color options shown: black and silver.
What To Check
Measure your vehicle's shaft lengths across suspension movement, confirm the mounting interfaces and identify whether the selected variant contains the required shafts and hardware. These are catalog values, not independently verified fitment tests.
2. MEUS Racing SCX30 V2 Coreless High Torque Servo for 1/30 Axial SCX30 RC Crawler
Product overview
A product overview has not been provided.
Who It Fits
The SCX30 V2 is an electronic steering-servo option for the Axial SCX30 platform, not an SCX24 drive-shaft or wheel component. Choose the variant based on the intended weight distribution and electronic compatibility.
Listed Details
- Voltage range: 5–7.4 V.
- Servo size: 16.8 × 9.1 × 23 mm; servo horn teeth: 20T.
- Aluminum version is listed at 9.5 g; brass version at 19.5 g.
- The source lists torque figures of 3.8–4.8 kg-cm, with operating conditions requiring confirmation.
What To Check
Verify the receiver/ESC power supply, spline/horn compatibility, mounting clearance and whether the advertised torque applies to your chosen voltage and version. No steering-speed or durability tests were performed for this review.
3. MEUS Racing 1.0-inch Aluminum Beadlock Wheels for 1/18 TRX4M 1/24 SCX24 AX24 FCX24 RC Crawlers
Product overview
A product overview has not been provided.
Who It Fits
These 1.0-inch aluminum beadlock wheels are offered for small-scale crawler builds, including families named in the seller title such as TRX4M and SCX24. Exact hub and tire compatibility still depends on your setup.
Listed Details
- Aluminum alloy construction; listed weight 9.7 g per wheel.
- Listed diameter 28.5 mm, width 12 mm and hex width 7.1 mm.
- Multiple MW1001–MW1006 design variants and black, silver or gold finishes appear in the listing.
What To Check
Confirm wheel bead seat, offset, axle hex and tire sizing. Do not infer that every cosmetic design variant has identical mounting hardware or that a 1.0-inch wheel fits a tire intended for a 1.3-inch rim.
4. 【US Warehouse】MEUS Racing SCX24 C10 Stainless Steel Drive Shaft for Axial 1/24 SCX24 C10 Bronco JLU
Product overview
A product overview has not been provided.
Who It Fits
This stainless steel SCX24 C10 drive shaft option is labeled for the 1/24 Axial SCX24 C10 / Bronco-JLU family in the merchant title. It has a different shaft-length combination from the Deadbolt listing.
Listed Details
- Listed weight: 18.2 g; stainless steel material.
- Adjustable short shaft: 45–58 mm; adjustable long shaft: 55–75 mm.
- Listed screw size: M1.4; black and silver options.
What To Check
Confirm the exact chassis version and measure both shaft positions at full compression and extension. Do not substitute these ranges for the Deadbolt or Gladiator versions on the basis of shared SCX24 branding alone.
5. 【US Warehouse】MEUS Racing SCX24 Gladiator Stainless Steel Drive Shafts For 1/24 SCX24 Jeep Gladiator Power Wagon
Product overview
A product overview has not been provided.
Who It Fits
This pair of shafts is named for the SCX24 Gladiator / Jeep Gladiator Power Wagon platform. Its longer listed rear-length range distinguishes it from the C10 and Deadbolt examples.
Listed Details
- Stainless steel material and listed 20.4 g weight.
- Adjustable short shaft: 45–58 mm; long shaft: 67.3–95 mm.
- Black and silver options are shown.
What To Check
Compare the merchant's vehicle fit list with your exact Gladiator or Power Wagon version and measure the necessary working shaft lengths. Verify fasteners and the option selected before purchasing.
6. MEUS Racing 1.3-Inch Beadlock Wheels for 1/18 TRX4M 1/24 SCX24 AX24 FCX24 RC Crawlers
Product overview
A product overview has not been provided.
Who It Fits
The 1.3-inch beadlock wheel is the larger-rim alternative in this selection. It is aimed at small-scale crawler setups where tire bead size and available clearance support a 1.3-inch rim.
Listed Details
- Aluminum alloy; listed weight 20.3 g per wheel.
- Listed diameter: 36.8 mm; width: 16.5 mm; hex width: 7.1 mm.
- Several MW1301–MW1306 design styles are shown in black, gold or silver.
What To Check
Confirm tire bead dimensions, axle hex, wheel offset and steering clearance. The 1.3-inch wheel is not a drop-in substitution for a 1.0-inch model simply because both fit a crawler product category.
7. MEUS Racing TRX4M Cuttable Drive Shafts for 1/18 Traxxas TRX4M RC Crawler Car
Product overview
A product overview has not been provided.
Who It Fits
The cuttable stainless steel drive shaft is offered for the 1/18 Traxxas TRX4M crawler. It is intended for builds requiring length adjustment, but trimming is an irreversible fitment step.
Listed Details
- Listing describes an adjustable range of 55–150 mm and cuttable length of 95 mm.
- Material: stainless steel; listed weight: 15.5 g per piece.
- Black and silver options are shown.
What To Check
Measure the required shaft at both suspension extremes and confirm cutting guidance on the current merchant page before modifying a part. Check mounting compatibility with your specific TRX4M drivetrain.
8. MEUS Racing SCX24 V2 Cuttable Drive Shafts for 1/24 Axial SCX24 RC Crawler Car
Product overview
A product overview has not been provided.
Who It Fits
This SCX24 V2 cuttable stainless steel shaft is described for Axial SCX24 crawler configurations. Its listed cuttable minimum differs from the TRX4M shaft.
Listed Details
- Listed adjustable range: 50–150 mm; cuttable length: 99 mm.
- Material: stainless steel; listed weight: 15.5 g per piece.
- Black and silver variants shown.
What To Check
Check the specific SCX24 version, shaft interfaces and actual travel-length requirement. Do not assume that two shafts sharing a maximum listed length have the same usable minimum after modification.
9. Meus Racing Metal Transmission Gearbox Case with Gear Complete for 1/10 Axial SCX10
Product overview
A product overview has not been provided.
Who It Fits
This metal transmission gearbox case with gears is a 1:10 Axial SCX10 component. It is separate from the 1/24 SCX24 shaft and wheel choices, so scale and mounting compatibility are the first questions.
Listed Details
- Construction is listed as aluminum and steel.
- Open style: 180 g / 6.35 oz; sealing style: 201 g / 7.09 oz.
- The listing names several Axial SCX10 chassis references, including 90021, 90022, 90028 and 90016.
What To Check
Verify the exact SCX10 generation, housing mounting points, gear set and drive connections. Confirm which components are included with the selected open or sealing style.
10. MEUS Racing 1.0-inch MS6 MPRO PIN Tires 64MM & 57MM for 1/18 TRX4M 1/24 SCX24 AX24
Product overview
A product overview has not been provided.
Who It Fits
The MEUS Racing MS6 MPRO PIN tires are an option for smaller crawler wheels, but the named variants have distinct dimensions. Tire clearance, compound and rim compatibility matter more than the shared range name.
Listed Details
- Rubber material is listed.
- #1008 variant: 57 × 19 mm and approximately 10 g per tire.
- #1009 variant: 64 × 21 mm and approximately 13.4 g per tire.
- A separate #1002 60 × 20 mm option is also shown in the original listing.
What To Check
Choose by the exact SKU/variant, rim bead and available fender/body clearance. Confirm whether listing quantities refer to a single tire or a set.
Buying Notes
- Check the exact RC platform and trim: SCX24 Deadbolt, C10, Gladiator, SCX30, TRX4M and SCX10 are not interchangeable categories.
- Measure installed drive-shaft lengths at suspension travel extremes before buying a fixed-fit or cuttable design.
- For wheels and tires, compare wheel diameter, width, hex size, tire outer diameter and vehicle clearance together.
- For the SCX30 servo, verify controller voltage, servo-horn spline and mounting dimensions before choosing aluminum or brass.
- Confirm variant, inventory, delivery terms and included hardware on the merchant checkout; this article does not independently establish current stock or warranty.
Shipping Cost $4.99 for most countries, and Meusracing offer free shipping for orders over $60.
This requires the buyer to pay the tax to the local customs.Read full policy ↗
Incorrect Shipping Address If the customer entered an incorrect address when placing an order and did not notify the merchant to change it before the package was shipped, the address cannot be changed after the package is shipped.
Meusracing do not cover the return shipping costs.Read full policy ↗
Final Verdict
Start with the exact chassis, then verify shaft lengths, wheel dimensions and servo requirements. These ten listings cover different components, not ten interchangeable products.
FAQ
What is the listed material for 【US Warehouse】MEUS Racing SCX24 Deadbolt Stainless Steel Center Drive Shaft for 1/24 SCX24 Deadbolt B17?
The product page lists material as stainless steel material.
What is the listed material for MEUS Racing SCX30 V2 Coreless High Torque Servo for 1/30 Axial SCX30 RC Crawler?
The product page lists material as Aluminum or Brass.
What is the listed material for MEUS Racing 1.0-inch Aluminum Beadlock Wheels for 1/18 TRX4M 1/24 SCX24 AX24 FCX24 RC Crawlers?
The product page lists material as Aluminum alloy.
How We Researched
Compared ten saved MEUS Racing product listings, preserving their specific chassis labels, measurements and options. Seller-provided specifications are not independent test results.
Compare Options
Compare Options
| Part | Buyer use | Key listing detail |
|---|---|---|
| SCX24 Deadbolt center shaft | SCX24 Deadbolt-specific drivetrain fit | 35.5–40 mm short; 63–85 mm long adjustable ranges |
| SCX24 C10 shaft | C10 / stated Bronco-JLU variant | 45–58 mm short; 55–75 mm long |
| SCX24 Gladiator shaft | Longer Gladiator / Power Wagon configuration | 45–58 mm short; 67.3–95 mm long |
| 1.0-inch beadlock wheels | Smaller rim setup | 28.5 mm listed diameter; 12 mm width |
| 1.3-inch beadlock wheels | Larger rim setup | 36.8 mm diameter; 16.5 mm width |
| SCX30 V2 servo | Steering/electronics upgrade | 5–7.4 V; aluminum/brass options |
| Cuttable drive shafts | TRX4M or SCX24 V2 with careful measurement | Different listed minimum cut lengths |
| SCX10 gearbox | 1:10-scale drivetrain assembly | Open or sealing style |
| MS6 MPRO PIN tires | Traction and wheel-size pairing | 57 × 19 mm/ 64 × 21 mm options |
Use the individual product cards to check precise model labels, selected options and current merchant listing.
Fitment Checks Before Ordering
Fitment Checks Before Ordering
Start with the exact vehicle and axle/drivetrain design, then compare the seller's listed measurements with your existing parts. For shafts, confirm the working extension range rather than comparing one static length. For wheels, check hub hex, bead diameter and tire compatibility. For the servo, verify voltage, physical size and the horn interface.
Some items in this guide are vehicle-specific while others are accessory components; a matching brand alone is not sufficient evidence of fit.